> Desktop Security
Install & use TrueCrypt to secure data
IMPORTANT: Do not forget your password. There is virtually no way to recover your data without it.
Click here for more information on
encryption.
Click here for more information on TrueCrypt.
Download & run the TrueCrypt installation package:
Windows -
truecrypt-4.3a.exe,
TrueCrypt Setup 6.1.exe
Linux -
truecrypt-6.1-ubuntu-x86.tar.gz
Click here to create a secure volume on your workstation
Create a secure USB flash drive
Click Install
Click OK
Click No
Click Create Volume
Click Next
Click Select File…
Browse to the USB drive & type in Secure.tc for the file
name, click Save
Click Next
Click Next
Type in the desired size of the store (Must be smaller than
the free space & recommend it be at least 10-50 MB smaller than the drive
capacity)
Click Next
Click Format
Click OK
Click Exit
Click Tools->Traveller Disk Setup…
Set your options as above & click Browse in the File
Settings section
Select the USB drive & click OK
Click Browse in the Mount Settings section
Select Secure.tc & click Open
Click OK
When you insert your drive into a Windows PC with AutoPlay
enabled, you will get the option to mount the TrueCrypt volume.
Enter your password & click OK
You should have another drive available at the next
available letter. Anything saved to
this drive will be encrypted.
If you are having trouble with this page...you probably can't read this and any contact information I put here would be useless.
|
